January 01, 2020

​

RMV Technology Group Videos/DVD Programs are available for licensing per physical location or for use of multiple sites per company on a global basis. 

RMV Training videos are for the sole use of  providing visual and 'hands on' training aids for your corporate or ISO requirements.

Copies, editing  and resale of RMV videos are not permitted and remain the IP of RMV Technology Group.

​

More information on single site and multi-site rates, please call or email Renee Mitchell at 650.964.4792 or renee@esdrmv.com.

​

"Hands On" Videos Available for Training include

​

—  ESD Basics for the Engineer & Technician

—  Material Qualification Process of Packaging for the Packaging Engineer

—  Suspect Counterfeit Incoming Inspection Procedures for Supplier Materials and Components

February 03, 2023

​

​

​

Learn the NEW ESD S20.20-2014 requirements for DOD prime contractors, contract manufacturers, distributors and supppliers.  

​

You are now required to have supplier materials and packaging test results when audited by your Customer so be prepared!  No longer is a Supplier Tech Data Sheet acceptable.  

​

Learn how to go through an ESD Audit for ANSI/ESD S20.20-2014 and how to pass your audit.  Know how to get ready, what you need to do and be prepared.  

​

Learn the ESDS.541 Standard for Materials and Packaging and what you will need to test or have your Supplier test for you.  

​

AeroSpace & Defense requirements are now undergoing review with upper and lower limits for future implementation.

Be on the leading edge in meeting and exceeding those requirements to better protect the Warfighter into the 21st century. 

​

​

​

May 28, 2023

​

A detailed and comprehensive 3-day course on ESD Essentials for the iNARTE ESD Engineer & Technician.  

Implementation of an ESD Program for the factory and Cleanroom, ESD Procedures for Materials & Handling, ANSI/ESD Standards, Test Methods, Workstations, Equipment and Factory Issues, Electrostatic Calculations for the iNARTE ESD Engineer and Troubleshooting at the PCB Level will be covered in this course.

​

January 03, 2023

Learn techniques for tracking down difficult design or equipment problems in the lab or field.

Learn to reproduce in the lab difficult field problems that happen intermittently. Develop an understanding for design issues and noise sources that cause designs to fail.

Learn how to locate and deal with the sources of noise that cause problems in designs.

Learn about noise related reliability problems in system, board, and device design.

Learn to apply troubleshooting techniques in a logical way to uncover design problems.

Learn construction techniques for useful laboratory apparatus that can easily track down problems.

Learn how to use test equipment you already have in novel ways to find design problems.​

January 01, 2020

Materials Non-Compliance is a growing issue with off-shore suppliers, which is the leading source of supply for many aerospace & defense contractors despite buying from a US distributor.

In the repair, assembly and build of a sensitive device, the protective material is just as important to protect the end product from high yield failure during manufacture, handling, storage or shipment. 

Suspect Counterfeit Awareness Training is also critical for Logistics, Incoming Inspection, Procurement and Management due to  the growing number of counterfeits undetectable  at first glance when moving  through the supply chain. 

No longer is visual detection obvious to the untrained eye.   With the use of some simple techniques of observation and equipment widely used throughout Industry for other applications, RMV can provide the awareness necessary to mitigate and avoid the proliferation of material non-compliance and/or counterfeits throughout the DoD supply chain.     

 RMV leadership is comprised of iNARTE Certified SMEs in the Materials Handling, Long Term Storage and Transport of Ultra-Sensitive Components and Parts for the DoD, NASA and Industry.  

​

 Co-Chair of the SAE G-19 IEEE Counterfeit Parts Committee, Bob Vermillion, CEO/Founder, is the driving force behind the Incoming Inspection Standard under development for  the SAE G-19 Subcommittee.

​

 Specialized techniques for the avoidance and detection of non-compliant materials and suspect counterfeits in the supply chain can  qualitatively reduce  the risk levels associated with purchase of a part or component without traceability. 

​

 An internationally recognized Author, Speaker and Industry recognized SME, Bob Vermillion trains NASA, DoD and DOE primes and suppliers with an emphasis upon Incoming Inspection – the First Line of Defense!  

The NASA Safety Center recently commented “This was the best ‘hands on’ training I have ever had“- a compliment that Bob will never forget!

​

January 01, 2020

Today, +/-35 volts is a realistic ESD threshold so that DOD  professionals must be aware of and become trained in conducting work station area certification in support of the DoD ESD program.

​

Both  DoD and NASA are implementing procedures in the handling of Class 0A devices (<125 volts, HBM) to insure that materials are validated for conformance.

A full ANSI/ESD S20.20-2014 program requires certification of work stations in addition to Material Validation and Verification for Supplier compliance.  

In a laboratory environment, RMV conducts "hands on" and computerized instrumentation software for DOD agencies, Prime Contractors and Suppliers.  

Each participant will learn how to conduct assessments and certification of workstations and will  participate in conducting proper measurements and troubleshooting work areas to insure compliance.

 The training will be reinforced by hands on measurements. Each team member will be schooled in the proper protocols and given special templates for use within your facility.   

January 01, 2020

Before undergoing the ESDS20.20 -2014 certification, we will prepare you to go through the process and pass to the current requirements.  

​

For Aerospace and Defense organizations, ANSI/ESD S20.20-2014 is under revision and revamping to meet the rigorous requirements for compliance to NASA and Mil. Standards.  

​

RMV is the exclusive training center for the NEW iNARTE Aerospace & Defense Training that is limited to NASA and DoD civil servants and the support supply chain community that supports the Federal government. 

​

Please call Renee Mitchell at 650-964-4792 or email renee@esdaerospacetraining.org for more information on this cost saving program in support of Aerospace & Defense.